Industrial Grade Dehumidifier

Model 1872

The Anden Model 1872V1 Dehumidifier is designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit.

CIRCULATION

The Model 1872V1 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility.

INCLUDED

MODEL 76

Dedicated monitoring and control of each dehumidifier at canopy height.

INSTALLATION CONFIGURATIONS

The Anden Model 1872V1 Dehumidifier is the perfect solution for the precise management of humidity required in an indoor growing environment.

SUSPENDED

  • Air is pulled into the dehumidifier directly from the space, dehumidified and returned
    to the space.
  • The dehumidifier is hung from the ceiling to save space in the facility.

FREESTANDING

  • Air is pulled into the dehumidifier directly from the space, dehumidified and returned to the space.

INLET AND OUTLET DUCTED

  • Ducted to circulate air to equalize humidity, temperature and move CO2
  • Dehumidifier located in adjacent room and ducted to space requiring dehumidification.
  • Great for drying room applications where space may be limited.

UPGRADABLE CONTROLS

MODEL 8840

Easy-to-use color touch screen with all control options on the home screen.

MODEL 8830

Easy-to-use touch screen with all control options on the home screen.

MODEL 8820

Easy-to-use touch screen designed for temperature and humidity control.

MODEL 8082 Sensor

Monitor temperature and humidity in multiple locations. Readings averaged to balance temperature and humidity.